Out of the box, your Omada guest WiFi has guest isolation on: guests get the internet and nothing else. They can’t see your router, your TVs or each other. That’s the safe default, but it also blocks anything where a guest’s phone talks straight to the TV:
- Casting from YouTube, Netflix and other apps (Chromecast / Google Cast)
- AirPlay and screen mirroring from iPhones, iPads and Macs
- The BetterSTR TV phone remote
- Plex, DLNA and other apps that look for devices on the network
To make these work, turn guest isolation off on your guest network. Guests still sign in through your WiFi page exactly as before.
Turn guest isolation off
- Go to Devices → Wifi Devices → Omada in your dashboard.
- Under WiFi Networks, click Edit on your guest network (the one marked Guest network).
- Switch Guest isolation off. A note appears reminding you that guests will be able to reach your local network.
- Click Save Changes and confirm. Allow a minute for your access points to pick it up.

The network now shows Isolation off in the WiFi Networks list. To turn it back on, edit the network again and switch Guest isolation on.

Only let guests reach your TVs (recommended)
With isolation off, guests can reach everything on your local network by default, including your router’s admin page and any computers, cameras or NAS drives. You can limit them to just the devices they need:
- Go to Devices → Wifi Devices and click Network access in the Sections menu.
- Under When isolation is off, guests can reach, choose Only these addresses (recommended).
- Add your router (its address usually ends in
.1, for example192.168.1.1) so guests still get DNS, then each TV. The Quick add buttons fill in your router and your BetterSTR TVs for you. You can also enter a range such as192.168.1.0/24. - Click Save.

Give your TVs a fixed IP address
The list works by IP address, so if your router hands a TV a different address next week, guests lose access to it. Set a DHCP reservation for each TV on your router (usually under LAN or DHCP settings) so it always gets the same address.
Good to know
- Guests still sign in. Turning isolation off doesn’t change your WiFi page, speed tiers or guest marketing. It only changes what a guest can reach once they’re online.
- Guests can see each other’s devices too. With isolation off, AirPlay and Cast lists show every TV on the network. In a building with several units on one WiFi, use the Scan QR to enable casting setting so a TV only appears to the phone that scanned its code.
- Always-allowed devices are never isolated. Devices you let skip the sign-in page can reach your local network even with isolation on, so keep that list to your own devices.