Facebook Tracking Pixel
Wifi

How do I upgrade the firmware on my Omada access points?

Update an Omada access point to TP-Link's latest firmware from your BetterSTR dashboard with the green up-arrow button.

Updated 1 min read

TP-Link releases firmware updates for Omada access points with fixes for WiFi reliability, security and new features. BetterSTR checks your access points against TP-Link’s latest firmware and shows you when one can be upgraded, so you can update it from your dashboard without logging in to anything else.

Upgrade an access point

  1. Go to Devices → Wifi Devices → Omada in your dashboard.
  2. In the Access Points list, look for a green up arrow button in the Actions column. It only appears on access points with a newer firmware available. Hover over it to see the version it will install.

Access Points list: the green up-arrow button on Lounge AP means a firmware upgrade is available

  1. Click the up arrow and confirm.
  2. The access point downloads the update from TP-Link, installs it and reboots. It’s offline for a few minutes, then reconnects on its own and the up arrow disappears.

Before you click

  • Don’t unplug or power it off during the upgrade. Cutting the power part-way through can leave the access point unable to start.
  • Guests on that access point lose WiFi for a few minutes. Pick a time when the property is empty, or between stays, if you can.
  • One at a time if you have several access points, so the others keep guests online while each one updates.

No up arrow?

Then the access point is already on the latest firmware TP-Link offers for it, and there’s nothing to do. The list is refreshed every minute or so; click the refresh button above the list to check again.

An access point that shows Disconnected or Preconfigured can’t be upgraded until it’s back online. See Connecting Omada WiFi to Your Property for getting it connected.

Related articles

More in Wifi

All Wifi articles →

Still need a hand?

Book a free 1-on-1 video call and we will go through it with you on screen, or send us a message.

Contact support